ACADEMY SERIES · EPISODE 3Technology Selection
Dehumidification Technologies
There are three main technologies for industrial dehumidification: desiccant rotor, condensing and pool units. This episode compares their operating principles, achievable dew points, strengths and limits, and shows how the target dew point and the ambient temperature drive the right choice.
Published: 3 October 2026Narration: Turkish and English4:58
In this video
- Desiccant rotor units can reach dew points as low as −60 °C; for condensing and pool units the practical lower limit is +12 °C.
- About 75% of a desiccant rotor is the process zone and 25% the reactivation zone; reactivation air at 100–140 °C carries the captured moisture outside.
- With steam or natural gas reactivation, operating costs can fall by up to 75%; good filtration protects rotor life.
- Condensing units offer high efficiency (COP 3.5–5.0) and low investment in comfort applications, but are not recommended below 15 °C.
- Pool units are built for chlorinated humidity, with aluminium or stainless casings and epoxy-coated coils.
More from this series
More videos
Products & Technology
Neptronic × NKT: Turkey Distribution Agreement
Humidification · Neptronic · 1 October 2026
Service & Maintenance
Neptronic SKE4 — Water Temperature Sensor Alarm
Alarms & Troubleshooting · 27 August 2026
Applications & Field
Swiss Arena — HVAC Duct Details
Field Note · Ice Arena · 27 April 2025




