This video is narrated in Turkish.
SERVICE & MAINTENANCESettings & Commissioning
Neptronic SKE4 — External Analog Control Profile
The External Analog control profile on the Neptronic SKE4, where the 0–10 V humidity signal comes from an external controller: wiring examples and high-limit settings. Narrated in Turkish.
Published: 4 October 2026Narration: Turkish6:56
In this video
- The 0–10 V control signal comes from an HRO20 humidistat or the building automation system and lands on terminal 3 of the TB4 block on the control board.
- The video walks through wiring diagrams for three applications using the SHS80 duct high-limit control and the SHC80 humidity transmitter.
- Low-signal selection for the high limit can be done in the humidifier or in the HRO20, preventing duct condensation in variable air volume systems.
More from this series
Service & Maintenance
Installing an AD Series Dehumidifier
Desiccant Dehumidification · 2 November 2026
Service & Maintenance
Commissioning the AD Series
Desiccant Dehumidification · 2 November 2026
Service & Maintenance
AD Series Periodic Maintenance
Desiccant Dehumidification · 2 November 2026
Service & Maintenance
AD Series Troubleshooting
Desiccant Dehumidification · 2 November 2026
Service & Maintenance
Setting Up a Portable Dehumidifier
Portable Dehumidification · 1 November 2026
Service & Maintenance
Maintaining a Portable Dehumidifier
Portable Dehumidification · 1 November 2026








