Nem Kontrol TV

Selecting an industrial dehumidifier starts with an accurate moisture load calculation. This episode walks through the seven moisture sources, a worked infiltration example and how the target dew point drives the choice of technology.

We usually judge indoor comfort by temperature alone, yet relative humidity shapes our health, productivity and the life of the building just as much. This episode uses the Sterling chart to cover the effects of low and high humidity, the ideal range and how humidity is controlled in both directions.

There are three main technologies for industrial dehumidification: desiccant rotor, condensing and pool units. This episode compares their operating principles, achievable dew points, strengths and limits, and shows how the target dew point and the ambient temperature drive the right choice.

Selecting an industrial dehumidifier is never just a single capacity figure. This episode covers eight criteria, from target relative humidity and dew point, moisture load and technology to reactivation energy, casing, automation and service, and a five-step decision process.

We have signed a distribution agreement for Turkey with Canada-based Neptronic. We combine our engineering experience in industrial dehumidification with Neptronic’s steam humidification technologies, offering a single point of contact for both dehumidification and humidification. Narrated in Turkish.

A short field clip of the arena’s HVAC duct details, filmed during the ZSC Zurich Lions vs EHC Kloten ice hockey match.

The External Analog control profile on the Neptronic SKE4, where the 0–10 V humidity signal comes from an external controller: wiring examples and high-limit settings. Narrated in Turkish.

The control panel of the Neptronic SKE4 electric steam humidifier and the basics of its user interface. Narrated in Turkish.

How the Internal Analog control profile works on the Neptronic SKE4 and where its settings sit in the control menu. Narrated in Turkish.

How to view the service hours and total run hours of the Neptronic SKE4 from the control panel. Narrated in Turkish.

How to reset the service hours on the Neptronic SKE4 after maintenance. Narrated in Turkish.

How to set how often the drain cycles run on the Neptronic SKE4. Narrated in Turkish.

How to set the blowdown (partial drain) rate on the Neptronic SKE4. Narrated in Turkish.

How to limit the maximum steam output, i.e. the capacity, of the Neptronic SKE4. Narrated in Turkish.

How the safety controls used with the Neptronic SKE4 work and the role each plays in the system. Narrated in Turkish.

What the Klixon thermal safety cutout in the Neptronic SKE4 does and how to check it. Narrated in Turkish.

What the water temperature sensor alarm on the Neptronic SKE4 electric steam humidifier means and the basic checks to carry out when it appears. Narrated in Turkish.

What the water level sensor alarm on the Neptronic SKE4 means and the basic checks to carry out when it appears. Narrated in Turkish.

The overheat alarm on the Neptronic SKE4 and the main components to check when it appears. Narrated in Turkish.

The Heat Timeout alarm on the Neptronic SKE4 and the main points to check when it appears. Narrated in Turkish.

Possible causes of the Fill Timeout alarm on the Neptronic SKE4 and the points to check. Narrated in Turkish.

The Failed Pump alarm on the Neptronic SKE4 and the basic checks to carry out when it appears. Narrated in Turkish.

Selecting and configuring the External Network control profile on the Neptronic SKE4, and how it works. Narrated in Turkish.

How the automatic fill valve of the Neptronic SKE4 works and how to check it. Narrated in Turkish.

The Contactor Fuse alarm on the Neptronic SKE4 and the main points to check when it appears. Narrated in Turkish.

The Blocked Piping alarm on the Neptronic SKE4 and the points to check when it appears. Narrated in Turkish.

A step-by-step walkthrough of the maintenance procedure for the Neptronic SKE4 electric steam humidifier. Narrated in Turkish.