This video is narrated in Turkish.
Neptronic SKE4 — Heat Timeout Alarm
The Heat Timeout alarm on the Neptronic SKE4 and the main points to check when it appears. Narrated in Turkish.
In this video
- The alarm indicates that the unit did not reach the required heating or steam production conditions within the expected time.
- The system’s electrical and thermal components may then need to be checked.
More from this series
The AD series are silica gel rotor industrial dehumidifiers that run continuously in production areas and warehouses where low humidity is needed.
How well an AD series silica gel rotor dehumidifier performs on site depends on the checks made at first start-up and on correctly set airflows.
AD series silica gel rotor dehumidifiers depend on regular maintenance to run efficiently.
We go through the most common fault symptoms on an AD series silica gel rotor dehumidifier and the first checks to make before calling service: unit…
A wheeled refrigerant dehumidifier works in warehouses, factories and on building sites, and where it stands matters as much as its capacity.
Maintaining a wheeled refrigerant dehumidifier is simple, but if it is skipped, capacity drops and the unit is put under strain.
More videos
In winter the air in a heated bakery goes dry: an early skin forms in proofing, flour turns to dust and the balance in packing is lost.
In a cleanroom, humidity can upset production in both directions.
If flooring opens up in winter, furniture joints separate and wood cracks, the cause is often dry air.








