Relative Humidity and Health
We usually judge indoor comfort by temperature alone, yet relative humidity shapes our health, productivity and the life of the building just as much. This episode uses the Sterling chart to cover the effects of low and high humidity, the ideal range and how humidity is controlled in both directions.
In this video
- Relative humidity depends on temperature: in a space heated in winter it falls quickly even though the amount of water in the air stays the same.
- According to the Sterling chart, most risks reach their lowest point between 40% and 60%.
- Below 30%, airways, skin and eyes dry out, static electricity threatens sensitive electronics and wood shrinks.
- Above 60%, mould, fungi, bacteria and dust mites multiply, and building materials, energy use and product quality suffer.
- For most living and working spaces 40–50% RH is considered ideal; the balance is kept in both directions with dehumidification and humidification.
More from this series
Selecting an industrial dehumidifier starts with an accurate moisture load calculation.
There are three main technologies for industrial dehumidification: desiccant rotor, condensing and pool units.
Selecting an industrial dehumidifier is never just a single capacity figure.
In winter, heated indoor air can drop below 15% relative humidity.
In an indoor pool, the heated water surface evaporates all day; this evaporation cannot be prevented, only controlled.
Both steam humidifier technologies use about 0.75 kWh per kilogram of steam; the difference lies in water quality, control accuracy and maintenance.
More videos
The AD series are silica gel rotor industrial dehumidifiers that run continuously in production areas and warehouses where low humidity is needed.
How well an AD series silica gel rotor dehumidifier performs on site depends on the checks made at first start-up and on correctly set airflows.
AD series silica gel rotor dehumidifiers depend on regular maintenance to run efficiently.








