Electrode or Resistive?
Both steam humidifier technologies use about 0.75 kWh per kilogram of steam; the difference lies in water quality, control accuracy and maintenance. This episode covers how each technology works, the water conductivity band, scale management, ten years of consumables and a decision flow for selection.
In this video
- Both technologies use about 0.75 kWh per kilogram of steam; the difference lies in water, control and maintenance.
- In an electrode unit the current is carried by minerals in the water; according to Neptronic's technical report it works within about 125–1,250 µS/cm and does not work with RO or DI water.
- In a resistive unit the water is boiled by heating elements in a stainless steel steam tank; it works with any water from mains to deionised and holds RH to about ±1% with solid-state relays.
- In the example scenario from Neptronic's report, a two-cylinder electrode unit producing 68 kg of steam per hour, assuming two replacements a season on average, uses 40 cylinders in ten years; the real frequency depends on water quality and the operating profile. A resistive unit has no cylinder to replace.
- When the water is RO or DI, or RH must be held in a narrow band, resistive technology comes first.
More from this series
Selecting an industrial dehumidifier starts with an accurate moisture load calculation.
We usually judge indoor comfort by temperature alone, yet relative humidity shapes our health, productivity and the life of the building just as much.
There are three main technologies for industrial dehumidification: desiccant rotor, condensing and pool units.
Selecting an industrial dehumidifier is never just a single capacity figure.
In winter, heated indoor air can drop below 15% relative humidity.
In an indoor pool, the heated water surface evaporates all day; this evaporation cannot be prevented, only controlled.
More videos
The AD series are silica gel rotor industrial dehumidifiers that run continuously in production areas and warehouses where low humidity is needed.
How well an AD series silica gel rotor dehumidifier performs on site depends on the checks made at first start-up and on correctly set airflows.
AD series silica gel rotor dehumidifiers depend on regular maintenance to run efficiently.








