Dehumidification Technologies
There are three main technologies for industrial dehumidification: desiccant rotor, condensing and pool units. This episode compares their operating principles, achievable dew points, strengths and limits, and shows how the target dew point and the ambient temperature drive the right choice.
In this video
- Desiccant rotor units can reach dew points as low as −60 °C; condensing units cannot go much below about +5 °C and work best above +10 °C.
- About 75% of a desiccant rotor is the process zone and 25% the reactivation zone; reactivation air at 100–140 °C carries the captured moisture outside.
- With natural gas or steam reactivation, operating costs typically fall by 40–60%, and by up to 75% with waste heat; good filtration protects rotor life.
- Condensing units offer high efficiency (COP 3.5–5.0) and low investment in comfort applications, but are not recommended below 15 °C.
- Pool units are built for chlorinated humidity, with coated steel, aluminium or stainless casings and epoxy- or cataphoresis-coated coils.
More from this series
Selecting an industrial dehumidifier starts with an accurate moisture load calculation.
We usually judge indoor comfort by temperature alone, yet relative humidity shapes our health, productivity and the life of the building just as much.
Selecting an industrial dehumidifier is never just a single capacity figure.
In winter, heated indoor air can drop below 15% relative humidity.
In an indoor pool, the heated water surface evaporates all day; this evaporation cannot be prevented, only controlled.
Both steam humidifier technologies use about 0.75 kWh per kilogram of steam; the difference lies in water quality, control accuracy and maintenance.
More videos
The AD series are silica gel rotor industrial dehumidifiers that run continuously in production areas and warehouses where low humidity is needed.
How well an AD series silica gel rotor dehumidifier performs on site depends on the checks made at first start-up and on correctly set airflows.
AD series silica gel rotor dehumidifiers depend on regular maintenance to run efficiently.








